Isixhumi sowesilisa se-N sohlobo lwe-RF sekhebuli eyi-coaxial engu-7/8″


  • Indawo Yomsuka:E-Shanghai, China (Mainland)
  • I gama le-brand:I-Telsto
  • Inombolo Yemodeli:TEL-NM.78-RFC
  • Uhlobo: N
  • Isicelo: RF
  • Ubulili:Owesilisa
  • Ibanga lemvamisa:0-6GHz
  • Izinto zekhondatha zangaphandle:Ithusi
  • Izinto ze-conductor zangaphakathi:Ibhulonzi
  • Incazelo

    Imininingwane

    Ukwesekwa Komkhiqizo

    Isicelo somkhiqizo

    Izixhumi ezingu-N ezitholakala kokubili owesilisa nowesifazane, ziklanyelwe futhi zenzelwe amasayithi e-GSM, CDMA, TD-SCDMA.

    TEL-NM.78-RFC2
    TEL-NM.78-RFC3

    Ukucaciswa

    Isixhumi sowesilisa esingu-7/8" sentambo ye-coaxial
    1. Izindinganiso zezixhumi: Ngokuhambisana ne-IEC60169-16
    2. Intambo yesikulufu se-interface: 5/8-24UNEF-2A3.Material kanye Plating:
    Umzimba: ithusi, i-Ni/A icwecwe
    I-insulator: Teflon
    Umqhubi wangaphakathi: ithusi, i-Au plated
    4. Indawo yokusebenza
    Izinga lokushisa lokusebenza: -40°+85℃
    Umswakama ohlobene: 90%~95%(40±2℃)
    Umfutho we-atmospheric: 70 ~ 106Kpa
    Inkungu kasawoti: Inkungu eqhubekayo amahora angu-48(5% NaCl)

    Okuhlobene

    Umdwebo Wemininingwane Yomkhiqizo04
    Umdwebo Wemininingwane Yomkhiqizo02
    Umdwebo Wemininingwane Yomkhiqizo09
    Umdwebo Wemininingwane Yomkhiqizo08

  • Okwedlule:
  • Olandelayo:

  • TEL-NM.78-RFC4

    Imodeli:TEL-NM.78-RFC

    Incazelo

    N Isixhumi sowesilisa sekhebuli eguquguqukayo engu-7/8″

    Material kanye Plating
    Oxhumana naye maphakathi I-Brass / Silver Plating
    I-insulator I-PTFE
    Umzimba & Umqhubi Wangaphandle Ithusi / ingxubevange ehlanganiswe ne-tri-alloy
    I-Gasket I-Silicon Rubber
    Izici zikagesi
    Impedance yezici 50 ohm
    I-Frequency Range DC~3 GHz
    I-Insulation Resistance ≥5000MΩ
    Amandla e-Dielectric ≥2500 V rms
    Ukumelana nokuxhumana nendawo ≤1.0 mΩ
    Ukumelana nokuxhumana kwangaphandle ≤0.25 mΩ
    Ukulahlekelwa Kokufaka ≤0.1dB@3GHz
    I-VSWR ≤1.15@3.0GHz
    Izinga lokushisa -40 ~ 85℃
    I-PIM dBc(2×20W) ≤-160 dBc(2×20W)
    Ingangeni manzi IP67

    Imiyalo yokufakwa kwe-N noma 7/16 noma 4310 1 / 2″ intambo eguquguqukayo kakhulu

    Isakhiwo sesixhumi: ( Fig1 )
    A. nati langaphambili
    B. back nut
    C. gasket

    Imiyalelo yokufaka001

    Ubukhulu bokuhlubula bunjengoba kukhonjiswe kumdwebo (Fig2), ukunakwa kufanele kukhokhwe ngenkathi kuhlubula:
    1. Indawo yokugcina ye-conductor yangaphakathi kufanele i-chamfered.
    2. Khipha ukungcola okufana nesikali sethusi bese ubhalisa ekugcineni kwekhebula.

    Imiyalelo yokufaka002

    Ukuhlanganisa ingxenye yokuvala: Khipha ingxenye yokuvala eduze komqhubi wangaphandle wekhebula njengoba kukhonjisiwe umdwebo (Fig3).

    Imiyalelo yokufaka003

    Ukuhlanganisa nati emuva (Fig3).

    Imiyalelo yokufaka004

    Hlanganisa inati langaphambili nangemuva ngokukruqula njengoba kukhonjiswe kumdwebo (Amakhiwane( 5)
    1. Ngaphambi kokujija, gcoba ungqimba lwamafutha okugcoba kwi-o-ring.
    2. Gcina inadi elingemuva nekhebula kunganyakazi, Khipha emzimbeni wegobolondo elikhulu emzimbeni wegobolondo elingemuva.Skrolela phansi igobolondo elikhulu lomzimba wegobolondo langemuva usebenzisa isikrufu senkawu.Ukuhlanganisa kuphelile.

    Imiyalelo yokufaka005

    I-Telsto ihlale ikholelwa ifilosofi yokuthi isevisi yamakhasimende kufanele inakwe kakhulu okuzoba yigugu kithi.Umgomo wethu uwukunikeza amakhasimende ethu imikhiqizo emihle kakhulu kanye nesixazululo esihlanganisiwe esingenantambo esinezinga eliphezulu lezinsizakalo, futhi siqinisekise ukuthi wonke amakhasimende ethu azothola ukwesekwa okusebenzayo, okufika ngesikhathi futhi okuqine kakhulu.

    Abasebenzi bethu abanolwazi nabazinikele banomgomo ofanayo wokweqa okulindele, ngokuzibophezela kwethu ekuhlinzekeni amakhasimende kanye nekhwalithi, i-Telsto ingahlangabezana nezidingo zamaphrojekthi wakho wengqalasizinda engenantambo ngaphakathi kwesabelomali sephrojekthi kanye nezikhathi ezimisiwe.

    Bhala umyalezo wakho lapha futhi usithumelele wona