I-adaptha ye-RF coaxial 7/16 ye-DIN yesifazane ukuya ku-DIN i-engeli engakwesokudla yowesilisa

Indawo Yomsuka:E-Shanghai, China (Mainland)

I gama le-brand:I-Telsto

Inombolo Yemodeli:TEL-DINF.DINMA-AT

Uhlobo:I-DIN Owesifazane kuya ku-DIN I-ANGLE YESIlisa

Isicelo: RF

Okubalulekile:I-Brass ne-Teflon

Ukucwenga:I-Sliver ne-Tri-alloy

Uhlobo lwesixhumi:I-DIN Owesifazane kuya ku-DIN Isixhumi se-engeli yesilisa

I-VSWR:≤1.10@DC-3000MHz

Ukuphazamiseka:50ohm

Ibanga Lemvamisa:I-DC-6GHz

Isilinganiso sokumelana nesimo sezulu:IP67

Ikhodi ye-HS:85369090

Thumela i-imeyili kithi

Incazelo

Imininingwane

Ukwesekwa Komkhiqizo

Izici Nezinzuzo

50 Ohm impedance igama
Ilungele izinhlelo zokusebenza ezidinga i-PIM ephansi kanye nokuthopha okuphansi
Ihambisana ne-IP-67

Izinhlelo zokusebenza

I-Distributed Antenna Systems (DAS)
Iziteshi Eziyisisekelo
Ingqalasizinda engenazintambo

Okuhlobene

Okwedlule: 4.3/10 Isixhumi sowesilisa kuya ku-N wesifazane

Olandelayo: N I-adaptha Yesifazane kuya ku-Din Yabesilisa

TEL-DINF.DINMA-AT002

Imodeli:TEL-DINF.DINMA-AT

Incazelo:

I-DIN Owesifazane kuya ku-Din Owesilisa I-Angle yesokudla ye-RF Adaptha

Material kanye Plating
	Okubalulekile	Ukucwenga
Umzimba	Ithusi	I-Tri-Alloy
I-insulator	I-PTFE	/
Umqhubi wesikhungo	Ithusi le-Phosphor	Ag

TEL-DINF.DINMA-AT003

Izici zikagesi
Impedance yezici	50 ohm
Imbobo 1	7/16 DIN Owesilisa
Itheku 2	7/16 DIN Owesifazane
Uhlobo	I-Engeli Yesokudla
I-Frequency Range	DC-7.5GHz
I-VSWR	≤1.10(3.0G)
I-PIM	≤-160dBc
I-Dielectric Withstanding Voltage	≥4000V RMS,50Hz, ezingeni lolwandle
I-Dielectric Resistance	≥10000MΩ
Xhumana Nokumelana	Othintana Naye Ngesikhungo ≤0.40mΩOthintana Naye Wangaphandle ≤0.25mΩ
Omakhenikha
Ukuqina	Imijikelezo yokukhwelana ≥500
Ezemvelo
Izinga lokushisa	-40~+85℃

Imiyalo yokufakwa kwe-N noma 7/16 noma 4310 1 / 2″ intambo eguquguqukayo kakhulu

Isakhiwo sesixhumi: ( Fig1 )
A. nati langaphambili
B. back nut
C. gasket

Imiyalelo yokufaka001

Ubukhulu bokuhlubula bunjengoba kukhonjiswe kumdwebo (Fig2), ukunakwa kufanele kukhokhwe ngenkathi kuhlubula:
1. Indawo yokugcina ye-conductor yangaphakathi kufanele i-chamfered.
2. Khipha ukungcola okufana nesikali sethusi bese ubhalisa ekugcineni kwekhebula.

Imiyalelo yokufaka002

Ukuhlanganisa ingxenye yokuvala: Khipha ingxenye yokuvala eduze komqhubi wangaphandle wekhebula njengoba kukhonjisiwe umdwebo (Fig3).

Imiyalelo yokufaka003

Ukuhlanganisa nati emuva (Fig3).

Imiyalelo yokufaka004

Hlanganisa inati langaphambili nangemuva ngokukruqula njengoba kukhonjiswe kumdwebo (Amakhiwane( 5)
1. Ngaphambi kokujija, gcoba ungqimba lwamafutha okugcoba kwi-o-ring.
2. Gcina inadi elingemuva nekhebula kunganyakazi, Khipha emzimbeni wegobolondo elikhulu emzimbeni wegobolondo elingemuva.Skrolela phansi igobolondo elikhulu lomzimba wegobolondo langemuva usebenzisa isikrufu senkawu.Ukuhlanganisa kuphelile.

Imiyalelo yokufaka005