N Isixhumi sowesilisa isigxivizo esiqondile sentambo ye-RF engu-1/2" Super flexible RF
Izixhumi ze-RF zivame ukusetshenziswa namakhebula angama-coaxial futhi zenzelwe ukugcina isivikelo esinikezwa yi-coaxial design. Izixhumi ze-RF zezinhlobo ezahlukahlukene zivame ukusetshenziselwa imisebenzi engenantambo.
Izixhumi ezingu-N ziyatholakala nge-impedance engu-50ohm no-75ohm. Ibanga lefrikhwensi lifinyelela ku-18GHz. Kuye ngesixhumi nohlobo lwekhebula. I-screw-type coupling mechanism ihlinzeka ngoxhumano oluqinile noluthembekile. Izitayela zokuxhuma ziyatholakala ngezinhlobo zamakhebula eziguquguqukayo, ezivumelanayo, ezingaqinile kanye nezinhlobo zamakhebula zikathayela. Kokubili izinqubo zokunqanyulwa kwekhebula le-crimp ne-clamp zisetshenziselwa lolu chungechunge.
Izicelo: Ama-Antenna/ Isiteshi sesisekelo / Ukusakaza okubanzi / Ukuhlanganiswa kwekhebula / Iselula / Izingxenye / Instrumentation/Microwave Radio/Mil-Aero PCS/Radar / AmaRadio/Satcom /Surge ukuvikelwa WLAN.
Uhlobo Lwesixhumi | N isixhumi sowesilisa |
Impedance | 50ohm |
Izinto Zokuxhuma | Ithusi |
Ama-insulators | I-PTFE |
Xhumana Plating | I-Nickel plated |
Iphinikhodi yokuxhumana | Ithusi, i-Silver Plating |
Ama-Crimp ferrules | I-alloy yethusi, i-nickel plating |
Izici | Ukuvikela isimo sezulu |
Uhlobo Lokukhweza | Ukukhweza ikhebula |
Ukuxhumeka kwesixhumi | Ukuxhumana okunentambo |
Amamodeli wekhebula | 1/2" rf ikhebula le-coaxial superflex feeder |
Imodi Elungisiwe | Isikulufa |
Izixhumi ezingu-N ezitholakala kokubili owesilisa nowesifazane, ziklanyelwe futhi zenzelwe amasayithi e-GSM, CDMA, TD-SCDMA.
Isixhumi esisilisa esingu-N sentambo ye-coaxial engu-1/2" super flexible
1. Izindinganiso zezixhumi: Ngokuhambisana ne-IEC60169-16
2. Intambo yesikulufu se-interface: 5/8-24UNEF-2A3. Material kanye Plating:
Umzimba: ithusi, i-Ni/A icwecwe
I-insulator: Teflon
Umqhubi wangaphakathi: ithusi, i-Au plated
4. Indawo yokusebenza
Izinga lokushisa lokusebenza: -40°+85℃
Umswakama ohlobene: 90%~95%(40±2℃)
Umfutho we-atmospheric: 70 ~ 106Kpa
Inkungu kasawoti: Inkungu eqhubekayo amahora angu-48(5% NaCl)
5. Izici zikagesi
I-impedance encane 50Ω
Ibanga lemvamisa: DC-3G
Ukumelana nokuxhumana(mΩ): I-conductor yangaphandle ≤0.25, i-Inner conductor ≤1
Ukumelana ne-insulation(MΩ)≥5000
Ukumelana ne-voltage AC(V/min)2500
I-VSWR(0-3GHz) ≤1.10
Kuthiwani ngekhwalithi yakho?
Yonke imikhiqizo esiyihlinzekayo ihlolwe ngokuqinile ngumnyango wethu we-QC noma indinganiso yokuhlola yezinkampani zangaphandle noma kangcono ngaphambi kokuthunyelwa. Iningi lezimpahla ezifana nezintambo ze-coaxial jumper, ama-passive, njll. zihlolwe ngo-100%.
Ungakwazi yini ukunikeza amasampula okuhlolwa ngaphambi kokufaka i-oda elisemthethweni?
Impela, amasampula wamahhala anganikezwa. Siyajabula futhi ukweseka amakhasimende ethu ukuthi akhe imikhiqizo emisha ndawonye ukuze siwasize ukuthuthukisa imakethe yendawo.
Uyakwamukela ukwenza ngendlela oyifisayo?
Yebo, senza imikhiqizo ngendlela oyifisayo ngokwezidingo zekhasimende.
Singakanani isikhathi sokulethwa?
Ngokuvamile sigcina amasheya, ngakho ukulethwa kuyashesha. Kuma-oda ayinqwaba, kuzoba ngokwesidingo.
Yiziphi izindlela zokuthumela?
Izindlela zokuthumela eziguquguqukayo ngokuphuthuma kwekhasimende ngalinye, njenge-DHL, i-UPS, i-Fedex, i-TNT, ngomoya, ngolwandle zonke zamukelekile.
Ingabe ilogo yethu noma igama lenkampani lingaphrintwa emikhiqizweni yakho noma emaphaketheni?
Yebo, isevisi ye-OEM iyatholakala.
Ingabe i-MOQ ilungisiwe?
I-MOQ iyavumelana nezimo futhi samukela i-oda elincane njenge-oda lesilingo noma ukuhlolwa kwesampula.
Imodeli:TEL-NM.12S-RFC
Incazelo
N Isixhumi sowesilisa sentambo ye-RF engu-1/2″ Superflexible RF
Material kanye Plating | |
Oxhumana naye maphakathi | I-Brass / Silver Plating |
I-insulator | I-PTFE |
Umzimba & Umqhubi Wangaphandle | Ithusi / ingxubevange ehlanganiswe ne-tri-alloy |
I-Gasket | I-Silicon Rubber |
Izici zikagesi | |
Impedance yezici | 50 ohm |
I-Frequency Range | I-DC~3 GHz |
I-Insulation Resistance | ≥5000MΩ |
Amandla e-Dielectric | ≥2500 V rms |
Ukumelana nokuxhumana nendawo | ≤1.0 mΩ |
Ukumelana nokuxhumana kwangaphandle | ≤1.0 mΩ |
Ukulahlekelwa Kokufaka | ≤0.12dB@3GHz |
I-VSWR | ≤1.08@-3.0GHz |
Izinga lokushisa | -40 ~ 85℃ |
I-PIM dBc(2×20W) | ≤-160 dBc(2×20W) |
Ingangeni manzi | IP67 |
Imiyalo yokufakwa kwe-N noma 7/16 noma 4310 1 / 2″ intambo eguquguqukayo kakhulu
Isakhiwo sesixhumi: ( Fig1 )
A. nati langaphambili
B. back nut
C. gasket
Ubukhulu bokuhlubula bunjengoba kukhonjiswe kumdwebo (Fig2), ukunakwa kufanele kukhokhwe ngenkathi kuhlubula:
1. Indawo yokugcina ye-conductor yangaphakathi kufanele i-chamfered.
2. Khipha ukungcola okufana nesikali sethusi bese ubhalisa ekugcineni kwekhebula.
Ukuhlanganisa ingxenye yokuvala: Khipha ingxenye yokuvala eduze komqhubi wangaphandle wekhebula njengoba kukhonjisiwe umdwebo (Fig3).
Ukuhlanganisa nati emuva (Fig3).
Hlanganisa inati langaphambili nangemuva ngokukruqula njengoba kukhonjiswe kumdwebo (Amakhiwane( 5)
1. Ngaphambi kokujija, gcoba ungqimba lwamafutha okugcoba kwi-o-ring.
2. Gcina inadi elingemuva nekhebula kunganyakazi, Khipha umzimba wegobolondo elikhulu emzimbeni wegobolondo elingemuva. Skrolela phansi igobolondo elikhulu lomzimba wegobolondo langemuva usebenzisa isikrufu senkawu. Ukuhlanganisa kuphelile.