I-DIN Isixhumi Sesifazane sentambo ye-RF engu-1/2″ Super flexible RF


  • Indawo Yomsuka:E-Shanghai, China (Mainland)
  • I gama le-brand:I-Telsto
  • Inombolo Yemodeli:TEL-DINF.12S-RFC
  • Uhlobo:I-DIN 7/16 Isixhumi
  • Isicelo: RF
  • Imvamisa:I-DC-3GHz
  • I-Dielectric Resistance:≥5000MΩ
  • Incazelo

    Imininingwane

    Ukwesekwa Komkhiqizo

    7/16 Isixhumi se-Din siklanyelwe ngokukhethekile iziteshi eziyisisekelo zangaphandle kuzinhlelo zokuxhumana zeselula (i-GSM, CDMA, 3G, 4G), equkethe amandla aphezulu, ukulahlekelwa okuphansi, ugesi osebenza kakhulu, ukusebenza kahle okungangeni kwamanzi futhi kusebenza ezindaweni ezihlukahlukene.Kulula ukuyifaka futhi inikeza uxhumano oluthembekile.

    Izixhumi ze-Telsto 7/16 Din zitholakala ngobulili besilisa noma besifazane nge-50 Ohm impedance.Izixhumi zethu ze-7/16 DIN zitholakala ngezinguqulo ze-engeli eqondile noma kwesokudla, kanye, ne-4 hole flange, i-bulkhead, iphaneli yezimbobo ezi-4 noma izinketho zokukhweza kancane.Le miklamo yesixhumi se-7/16 DIN iyatholakala ngezindlela zokunamathisela, i-crimp noma i-solder.

    Izici Nezinzuzo

    ● I-IMD ephansi ne-VSWR ephansi inikeza ukusebenza kwesistimu okuthuthukisiwe.

    ● Idizayini yokuzigqamisa iqinisekisa ukuyifaka kalula ngethuluzi lesandla elijwayelekile.

    ● I-gasket ehlanganiswe ngaphambili ivikela othulini (P67) namanzi (IP67).

    ● I-Phosphor bronze / Ag plated contacts kanye nemizimba ecwecwe ye-Brass / Tri- Alloy iletha i-conductivity ephezulu kanye nokumelana nokugqwala.

    din rf isixhumi Din female kuya 12s

    Izinhlelo zokusebenza

    ● Ingqalasizinda engenazintambo

    ● Iziteshi eziyisisekelo

    ● Ukuvikelwa Kombani

    ● Ukuxhumana Ngesathelayithi

    ● Amasistimu we-Antenna

    I-OLYMPUS DIGITAL IKHAMELA
    Isixhumi esibonakalayo
    Ngokuvumelana ne I-IEC60169-4
    Ezogesi
      Impedance yesici 50ohm
    1 I-Frequency Range I-DC-3GHz
    2 I-VSWR ≤1.15
    3 I-Dielectric ukumelana ne-voltage ≥2700V RMS,50Hz, ezingeni lolwandle
    4 I-Dielectric Resistance ≥10000MΩ
    6 Xhumana Nokumelana Othintana Naye Wangaphandle≤1.5mΩ;Othintana Naye Ngesikhungo≤0.4mΩ
    7 Ukulahlekelwa Kokufaka(dB) Ngaphansi kuka-0.15
    8 I-PIM3 ≤-155dBc
    Omakhenikha
    1 Ukuqina Imijikelezo yokukhwelana ≥500
    Material kanye Plating
      Incazelo Okubalulekile Plating/Ni
    1 Umzimba Ithusi I-Tri-alloy
    2 I-insulator I-PTFE -
    3 Umqhubi wesikhungo QSn6.5-0.1 Ag
    4 Okunye Ithusi Ni
    Ezemvelo
    1 Izinga Lokushisa -40℃~+85℃
    2 Ingangeni manzi IP67

    Ukusekela:
    * Izinga eliphezulu elisezingeni

    * Intengo yokuncintisana kakhulu

    * Izixazululo ezinhle kakhulu ze-telecom

    * Izinsizakalo ezisebenzayo, ezinokwethenjelwa nezivumelana nezimo

    * Ikhono eliqinile lezentengiselwano lokuxazulula izinkinga

    * Abasebenzi abanolwazi lokunikeza zonke izidingo ze-akhawunti yakho

    ukupakisha
    Izihlungi kanye nezihlanganisi

    Okuhlobene

    Umdwebo Wemininingwane Yomkhiqizo1
    Umdwebo Wemininingwane Yomkhiqizo2
    Umdwebo Wemininingwane Yomkhiqizo3
    Umdwebo Wemininingwane Yomkhiqizo4

  • Okwedlule:
  • Olandelayo:

  • I-OLYMPUS DIGITAL IKHAMELA

    Imodeli:TEL-DINF.12S-RFC

    Incazelo

    I-DIN Isixhumi sowesifazane sekhebula engu-1/2″ Super flexible

    Material kanye Plating
    Oxhumana naye maphakathi I-Brass / Silver Plating
    I-insulator I-PTFE
    Umzimba & Umqhubi Wangaphandle Ithusi / ingxubevange ehlanganiswe ne-tri-alloy
    I-Gasket I-Silicon Rubber
    Izici zikagesi
    Impedance yezici 50 ohm
    I-Frequency Range DC~3 GHz
    I-Insulation Resistance ≥5000MΩ
    Amandla e-Dielectric 2500 V
    Ukumelana nokuxhumana nendawo ≤0.4 mΩ
    Ukumelana nokuxhumana kwangaphandle ≤0.2 mΩ
    Ukulahlekelwa Kokufaka ≤0.15dB@3GHz
    I-VSWR ≤1.08@-3.0GHz
    Izinga lokushisa -40 ~ 85℃
    I-PIM dBc(2×20W) ≤-160 dBc(2×20W)
    Ingangeni manzi IP67

    TEL-DINF.12S-RFC3

    Imiyalo yokufakwa kwe-N noma 7/16 noma 4310 1 / 2″ intambo eguquguqukayo kakhulu

    Isakhiwo sesixhumi: ( Fig1 )
    A. nati langaphambili
    B. back nut
    C. gasket

    Imiyalelo yokufaka001

    Ubukhulu bokuhlubula bunjengoba kukhonjiswe kumdwebo (Fig2), ukunakwa kufanele kukhokhwe ngenkathi kuhlubula:
    1. Indawo yokugcina ye-conductor yangaphakathi kufanele i-chamfered.
    2. Khipha ukungcola okufana nesikali sethusi bese ubhalisa ekugcineni kwekhebula.

    Imiyalelo yokufaka002

    Ukuhlanganisa ingxenye yokuvala: Khipha ingxenye yokuvala eduze komqhubi wangaphandle wekhebula njengoba kukhonjisiwe umdwebo (Fig3).

    Imiyalelo yokufaka003

    Ukuhlanganisa nati emuva (Fig3).

    Imiyalelo yokufaka004

    Hlanganisa inati langaphambili nangemuva ngokukruqula njengoba kukhonjiswe kumdwebo (Amakhiwane( 5)
    1. Ngaphambi kokujija, gcoba ungqimba lwamafutha okugcoba kwi-o-ring.
    2. Gcina inadi elingemuva nekhebula kunganyakazi, Khipha emzimbeni wegobolondo elikhulu emzimbeni wegobolondo elingemuva.Skrolela phansi igobolondo elikhulu lomzimba wegobolondo langemuva usebenzisa isikrufu senkawu.Ukuhlanganisa kuphelile.

    Imiyalelo yokufaka005

    Bhala umyalezo wakho lapha futhi usithumelele wona