7/16 DIN Owesifazane ku-N Owesilisa RF Coaxial Adapter Isixhumi Esifakiwe Isithombe

7/16 Din Female to n Male RF Coaxial Adapter Isixhumi

Indawo yemvelaphi:Shanghai, China (Mainland)

I gama le-brand:I-telsto

Inombolo yemodeli:Tel-nm.dinf-at

Uhlobo:N Isixhumi

Isicelo: RF

Isixhumi:N owesilisa, uDin 7/16 Owesifazane

Thumela i-imeyili kithi

Ukufanisa

Ukucacisa

Ukuxhaswa Komkhiqizo

Isixhumi se-Telsto RF sinobubanzi obuvame kakhulu be-DC-3 GHZ, kunikeza ukusebenza okuhle kwe-VSWR kanye nokuguquguquka okuphansi okuzayo. Lokhu kwenza kubekelwe kahle ukusetshenziswa eziteshini ezisesisekelo samaselula, kwasatshalaliswa izinhlelo ze-antenna (DAS) nezinhlelo zokusebenza zeselula ezincane.

I-COAX Adapthars iyindlela ephelele yokushintsha ngokushesha ubulili noma ukuxhunyathiswa hlobo lwekhebula elivele linqamule.

Le adaptha ye-caaxial ye-nickel-plated inesixhumi sowesilisa esiphikisana ne-7/16 Din Femal Connectoror.7 / 16 Din Female to n Male CAXAXTER isitayela somzimba oqondile. Le adaptha eqondile ye-7/16 Din Connectoror iyi-Adapter Adapter ye-Line Rf.

I-adaptha yethu engu-7/16 ye-NI ye-N N DOAXTAL DOAXTAL ADAPTER Design nge-50 Ohm Impladance. Le adaptha engu-50 Ohm 7/16 DIN iyenziwa ngokuqondile ukucaciswa kwe-RF Adapter futhi ine-VSWR ephezulu ye-1.15: 1.

● Zonke izinto zokwakha zithobela umthetho.

● Intengo yokuncintisana.

● Insizakalo ye-OEM enikeziwe.

● Sikwazi ukuhlinzeka ngezinhlobo ezahlukahlukene zezixhumi ngokuya ngesidingo samakhasimende.

Izinhlobo ezingama-4.3-10 zokukhetha kwakho

Umphumela	Ukufanisa	Ingxenye No.
I-adaptha ye-Rf	4.3-10 abesifazane ku-DIN GEDER ADAPTER	Tel-4310f.Dinf-at
	4.3-10 Owesifazane ku-DIN MODE MADER ADAPTER	Tel-4310f.Dinm-at
	4.3-10 Owesilisa oya e-Adapter Yesilisa	Tel-4310m.Dinf-at
	4.3-10 Owesilisa ukuze ad den sapter wesilisa	Tel-4310m.Dinm-at

Izinsizakalo zethu

1. Phendula uphenyo lwakho ngamahora angama-24 okusebenza.
2. Idizayini eyenziwe ngokwezifiso iyatholakala. I-OEM & ODM yamukelekile.
I-3. Isixazululo esikhethekile nesihlukile singanikezwa kumakhasimende ethu ngonjiniyela bethu abaqeqeshiwe nabaqeqeshiwe abaqeqeshiwe.
4. Isikhathi esisheshayo sokulethwa kokuhleleka okuhle.
I-5. Unolwazi ekwenzeni ibhizinisi nezinkampani ezinkulu ezisohlwini.
6. Amasampula wamahhala anganikezwa.
7. I-100% yokuqinisekisa ukufezekiswa kokukhokha nekhwalithi.

Okuhlobene

Okwedlule: I-Tim Pim 4.3 / 10 I-Jack Jack Jack to n isixhumi sowesilisa esiqonde i-adaptha yesilisa

Olandelayo: Rf coaxial n owesilisa kuya ku-n fear angle angela isixhumi

Tel-nm.dinf-at5

Imodeli:Tel-nm.dinf-at

Ukufanisa

N owesilisa oya e-DIN 7/16 i-adaptha yabesifazane

Izinto ezibonakalayo kanye nethanga
Ukuxhumana kwesikhungo	I-Brass / Isiliva Plating
Umshini wenulati	I-PTFE
Umzimba nomphakathi wangaphandle	I-Brass / Alloy Plated nge-Tri-Alloy
Gassela	I-silicon irabha
Izici zikagesi
Izici Ukuvikelwa	50 ohm
Ububanzi bokuvama	Dc ~ 3 ghz
Ukumelana nokufakelwa	≥5000MM
Amandla we-Dielectric	≥2500 v rms
Isikhungo Sokuxhumana Center	≤1.0 mω
Ukumelana Kwangaphandle Ukumelana	≤0.25 m Oh
Ukulahleka kokufaka	≤0.1DB@3ghz
Vswr	≤1.10@b-3.0GHz
Ububanzi bokushisa	-40 ~ 85 ℃
I-PIM DBC (2 × 20W)	≤-160 DBC (2 × 20W)
-Ngenamampuloso	IP67

Imiyalo yokufaka ye-N noma engu-7/16 noma i-4310 1/2 "ikhebula eliguquguqukayo

Ukwakheka kwesixhumi: (Fig1)
A. Front Nut
B. Back Nut
C. gasket

Ukufaka Imiyalo0011

Ubukhulu bokuhlunga bukhonjiswe umdwebo (Fig2), ukunakwa kufanele kukhokhwe ngenkathi kuhlazeka:
1. Ingaphezulu lokugcina lomqhubi wangaphakathi kufanele lihlazwe.
2. Susa ukungcola okufana nesilinganiso sethusi kanye ne-burr endaweni yokugcina yekhebula.

Ukufaka Imiyalo00002

Ukuhlangana kwengxenye yokubopha uphawu

Ukufaka Imiyalo00003

Ukuhlangana ne-nut emuva (Fig3).

Ukufaka Imiyalo0044

Hlanganisa i-Nut yangaphambili nangasemuva ngokushaya njengoba kukhonjisiwe ngumdwebo (amakhiwane (5)
1. Ngaphambi kokushaya, ufake ungqimba lokugcoba amafutha ku-O-ring.
2 Skrola phansi umzimba omkhulu wegobolondo lomzimba wegobolondo emuva usebenzisa i-monkey wrench. Ukubuthana sekuqediwe.

Ukufaka Imiyalo00005