Isihlanganisi se-Penta-band 4×1
Izici
● Ukuqondiswa Okuphezulu / Ukuhlukaniswa
● Isilinganiso Samandla 200W ngokufaka ngakunye, Ukuthembeka Okuphezulu
● Ukulahlekelwa Okuphansi Kokufakwa, i-VSWR Ephansi, i-PIM Ephansi(IM3)
| Izici Zikagesi | |
| Izici ze-Impedance | 50 Ohm |
| Ibanga Lokuvama / Ukulahlekelwa Kokufakwa | 790-960 / ≤0.35 |
| Ibanga Lokuvama / Ukulahlekelwa Kokufakwa | 1710-1880 / ≤0.35 |
| Ibanga Lokuvama / Ukulahlekelwa Kokufakwa | 1920-2170 / ≤0.35 |
| Ibanga Lokuvama / Ukulahlekelwa Kokufakwa | 2500-2700/ ≤0.35 |
| Ukuzihlukanisa | ≥50 |
| I-VSWR | ≤1.22 |
| Amandla | 200w |
| I-IMD3, dBc@+43dBmX2 | ≤-150dBc |
| Ubuningi bezixhumi | 5 |
| Uhlobo Lwezixhumi | I-DIN Owesifazane |
| Izinga Lokushisa Lokusebenza | -20 kuya ku-+65 ℃ |
| Izicelo | I-IP66 |
| Ukucaca kwe-DC/AISG | Ngokudlula (Ubuningi. 25A) |
| Ukuvikelwa Kokukhanyisa | 3Ka, 10/350 us pulse |
| Ukufaka | Ukufakwa kodonga |
Imiyalelo Yokufaka ikhebula eliguquguqukayo kakhulu elingu-N noma 7/16 noma 4310 elingu-1/2″
Isakhiwo sesixhumi: (Isithombe 1)
A. i-nati engaphambili
B. i-nati yangemuva
I-gasket ye-C.
Ubukhulu bokukhumula bunjengoba buboniswe kumdwebo (Isithombe 2), kufanele kunakwe ngenkathi kukhumula:
1. Ingxenye yokugcina yomqhubi wangaphakathi kufanele ihlungwe.
2. Susa ukungcola okufana nesikali sethusi kanye ne-burr ekugcineni kwekhebula.
Ukuhlanganisa ingxenye yokuvala: Faka ingxenye yokuvala ngaphakathi kwe-conductor yangaphandle yekhebula njengoba kuboniswe kumdwebo (Isithombe 3).
Ukuhlanganisa i-nati yangemuva (Isithombe 3).
Hlanganisa i-nut yangaphambili neyangemuva ngokuyikrufulula njengoba kuboniswe kumdwebo (Izithombe(5)
1. Ngaphambi kokusikeka, gcoba ungqimba lwamafutha okugcoba ku-o-ring.
2. Gcina i-nati yangemuva kanye nekhebula kunganyakazi, cindezela umzimba wegobolondo eliyinhloko emzimbeni wegobolondo elingemuva. Cindezela umzimba wegobolondo eliyinhloko lomzimba wegobolondo elingemuva usebenzisa isipanela senkawu. Ukuhlanganisa sekuqediwe.
