1/2″intambo ye-Jumper eguquguqukayo ephezulu, i-DIN 7/16 owesilisa ukuya ku-DIN 7/16 i-engeli engakwesokudla yabesilisa
| Thayipha igama | 1/2"s ikhebula le-jumper din owesilisa liqonde engeli elingakwesokudla | |
| Impedance | 50Ω | |
| Ukudlidliza | 100m/S2 (10~500Hz) | |
| I-Frequency Range | I-DC-6GHz | |
| Ukulahlekelwa Kokufaka | ≤ 0.15dB/6GHz | |
| Ukumelana ne-Voltage | 4000V rms ezingeni lolwandle | |
| I-Voltage esebenzayo | 2700Vr.ms ezingeni lolwandle | |
| Amandla amaphakathi | 3kw ubukhulu | |
| I-Insulation Resistance | ≥ 10000 MΩ | |
| Amandla okugcina amakhondatha aphakathi nendawo | ≥ 6N | |
| Ukuqina | ≥ 500(imijikelezo) | |
| Xhumana nokumelana | Othintana Naye Ngesikhungo ≤ 0.4mΩ | |
| Othintana Naye Wangaphandle ≤ 1.5mΩ | ||
| I-Voltage Standing Wave Ratio | Qondile | ≤ 1.20/6GHz |
| I-engeli yesokudla | ≤ 1.35/6GHz | |
1. Isixhumi se-coaxial se-RF
| 1.1 Izinto Zokuxhuma kanye Nokucwenga | |
| Umqhubi wangaphakathi | I-bronze, egcwele isiliva, ukujiya kwe-plating ≥0.003mm |
| Umqhubi wangaphandle | I-Brass, ehlanganiswe ne-ternary alloy, ukujiya kwe-plating≥0.002mm |
| I-Fastener: Ithusi | I-Insulation |
| i-dielectric | I-PTFE |
| 1.2 Isici sikagesi & nomakhenikha | |
| I-Impedans yezici: | 50Ω |
| Ibanga lemvamisa | I-DC-3GHz |
| I-VSWR | ≤1.15 (DC-3GHz) |
| Amandla e-Dielectric | ≥2500V |
| Xhumana nokumelana | umqhubi wangaphakathi≤1.0mΩ, umqhubi wangaphandle≤0.4mΩ |
| Ukumelana ne-insulator | ≥5000MΩ (500V DC) |
| I-VSWR | ≤1.15 (DC-3GHz) |
| I-PIM(IM3) | ≤-155dBc@2x43dBm |
| Ukuqina kwesixhumi | ≥500 imijikelezo |
2. Ikhebula le-coaxial ye-RF: 1/2" Ikhebula le-RF Eliguquguqukayo Eliphezulu
| 2.1 Izinto zokwakha | |
| Umqhubi wangaphakathi | intambo ye-aluminium embozwe ngethusi (φ3.60mm) |
| I-insulation dielectric | i-polyethylene foam (φ8.90mm) |
| Umqhubi wangaphandle | ithubhu yethusi likathayela (φ12.20mm) |
| Ijakhethi yekhebula | I-PE (φ13.60mm) |
| 2.2 Isici | |
| I-impedance yezimpawu | 50Ω |
| I-capacitor evamile | 80pF/m |
| Izinga lokudlulisela | 83% |
| Okuncane.irediyasi yokugoba eyodwa | 50mm |
| Amandla aqinile | 700N |
| Ukumelana ne-insulation | ≥5000MΩ |
| Ukuvimbela ukuthomba | ≥120dB |
| I-VSWR | ≤1.15 (0.01-3GHz) |
3. Ikhebula le-Jumper
| 3.1 Usayizi Wengxenye Yekhebula | |
| Ubude obuphelele bokuhlanganisa amakhebula | 1000mm±10, 2000mm±20, 3000mm±25,5000mm±40 |
| 3.2 Isici sikagesi | |
| I-Frequency Band | 800-2700MHz |
| Impedance yezici | 50Ω±2 |
| I-Voltage yokusebenza | 1500V |
| I-VSWR | ≤1.11 (0.8-2.2GHz), ≤1.18 (2.2-2.7GHz) |
| I-voltage ye-insulation | ≥2500V |
| Ukumelana ne-insulation | ≥5000MΩ (500V DC) |
| I-PIM(IM3) | ≤-155dBc@2x20W |
| 3.3 Isici sendawo | |
| Ingangeni manzi | IP68 |
| Ibanga lokushisa lokusebenza | -40 ℃ ukuze +85 ℃ |
| Ibanga lokushisa lesitoreji | -70 ℃ ukuze +85 ℃ |
3.4 Ukulahlekelwa Kokufaka:
| Imvamisa | 1m | 2m | 3m | 5m |
| 890-960MHz | ≤0.15dB | ≤0.26dB | ≤0.36dB | ≤0.54dB |
| 1710-1880MHz | ≤0.20dB | ≤0.36dB | ≤0.52dB | ≤0.80dB |
| 1920-2200MHz | ≤0.26dB | ≤0.42dB | ≤0.58dB | ≤0.92dB |
| 2500-2690MHz | ≤0.30dB | ≤0.50dB | ≤0.70dB | ≤1.02dB |
| 5800-5900MHz | ≤0.32dB | ≤0.64dB | ≤0.96dB | ≤1.6dB |
Ukupakisha Inkomba
Imiyalo yokufakwa kwe-N noma 7/16 noma 4310 1 / 2″ intambo eguquguqukayo kakhulu
Isakhiwo sesixhumi: ( Fig1 )
A. nati langaphambili
B. back nut
C. gasket
Ubukhulu bokuhlubula bunjengoba kukhonjiswe kumdwebo (Fig2), ukunakwa kufanele kukhokhwe ngenkathi kuhlubula:
1. Indawo yokugcina ye-conductor yangaphakathi kufanele i-chamfered.
2. Khipha ukungcola okufana nesikali sethusi bese ubhalisa ekugcineni kwekhebula.
Ukuhlanganisa ingxenye yokuvala: Khipha ingxenye yokuvala eduze komqhubi wangaphandle wekhebula njengoba kukhonjisiwe umdwebo (Fig3).
Ukuhlanganisa nati emuva (Fig3).
Hlanganisa inati langaphambili nangemuva ngokukruqula njengoba kukhonjiswe kumdwebo (Amakhiwane( 5)
1. Ngaphambi kokujija, gcoba ungqimba lwamafutha okugcoba kwi-o-ring.
2. Gcina inadi elingemuva nekhebula kunganyakazi, Khipha emzimbeni wegobolondo elikhulu emzimbeni wegobolondo elingemuva.Skrolela phansi igobolondo elikhulu lomzimba wegobolondo langemuva usebenzisa isikrufu senkawu.Ukuhlanganisa kuphelile.
